Setting up the Speedport W 700V - how it works

The Speedport W 700V is a router from Telekom that is used for analog and ISDN connections. Before you use your new Telekom router for the first time, you need to connect it to the telephone socket and set it up. We will show you how to do this correctly.

How to connect the Speedport W 700V before setting it up

The Speedport W 700V is a router from Telekom that has two analog phone ports, four LAN ports and one ISDN port. It allows you to surf the Internet via LAN or WLAN and encrypts your data with WPA2, WPA or WEP. Before using the device for the first time, it is necessary to connect it to your home phone line. To do this, connect the F jack of your telephone socket to the "Amt" input of the splitter, connect the DSL cable to the corresponding port of the Speedport and connect the F jack of the splitter directly to the Speedport.

These steps will set up your Speedport W 700V

Once you have connected your new Telekom router, the next step is to configure it properly. To start setting up your Speedport W 700V, please open a browser on your computer and enter the following address in the address field: "http://192.168.2.1/".

1. The user interface of the Telekom router will then open, where you should click on "Start configuration".
2. Now you will be prompted to enter the password of the Speedport W 700V. This is, if the device is still in factory state, "0000".
3. The setup wizard is then started and guides you step by step through the necessary configuration of the router.