Configuring Speedport W 925V - these steps are necessary

If you have a Speedport W 925V from Telekom as your new router, it is necessary to connect and configure it before using it for the first time. We explain step by step which data you need for this and how to proceed correctly to set up the device.

Before configuring: How to connect the Speedport W 925V

Before you can start configuring your Speedport W 925V, it is necessary to connect it properly. To do this, first connect the gray DSL cable to both the DSL jack of the Speedport and the F jack of your telephone socket. Then connect your telephone to the existing TAE sockets and use the yellow LAN cable to connect your computer before connecting the power plug to the power socket.

Speedport W 925V: How to configure the router

Once you have connected the Speedport W 925V, you can configure it using your PC. To do this, make sure that the PC is connected to the Internet via LAN or WLAN.

1. To start the configuration, please start the browser on the device you are using and enter "speedport.ip" in the address bar to open the router's user interface.
2. First enter the device password there, which you can find on the back of the Speedport W 925V.
3. Then log in with your Telekom number as well as the associated password and you will be guided step by step through the configuration.